2.7
Using Wireless LAN
Wireless communication is possible by adjusting the settings of the wireless LAN
to those for the wireless router. Take a note of the settings and save them for
reference. For more information about wireless setting, please refer to http://
panasonic.co.jp/pcc/products/en/netwkcam/
1.
Click [Wireless] on the Setup page.
2.
Set each parameter for the Wireless Configuration.
Setting
SSID
Communication
mode
Even if "802.11g exclusive" is in use, the existence of other wireless devices using 2.4
*1
GHz bandwidth —including 802.11b wireless devices— may make the baud rate of
802.11g slower.
•
The SSID must be set to match the SSID your wireless
router or wireless LAN uses. The SSID is limited to 32
characters (alpha numeric) and is case sensitive.
•
In "802.11b", there are a lot of 802.11b-compliant products
and they are inexpensive. They are widely prevalent, so
"802.11b" is useful when using your existing wireless
devices.
•
"802.11b/g" supports both 802.11b and 802.11g wireless
LAN standards. It is the communication mode that is easy
to install on your existing wireless LAN.
•
"802.11g exclusive" communicates using 802.11g only. It
does not support the mixed standard mode of 802.11b/g,
so it allows the use of original features of 802.11g.
[For assistance, please call: 1-800-272-7033]
Description
Operating Instructions
*1
61