Tunnel Mode (IPv4/IPv6)
An IPsec mode of operation where the entire IP packet including IP header is
authenticated and encrypted. A new IP header is added (protecting the entire
original packet). Both VPN clients and VPN gateways can use this mode.
Note
The camera can be accessed only from the PCs under the VPN router. Other
PCs cannot access the camera.
Not Encrypted
Prepare the following requirements.
Item
PC
Router
Camera
LAN
WAN
Operating System
Web Browser
ISP Service
(in IPv4)
ISP Service
(in IPv6)
Note
See the Panasonic Network Camera support website at
http://panasonic.co.jp/pcc/products/en/netwkcam/ for
the recommended router.
ISP Service
(in IPv4)
ISP Service
(in IPv6)
[For assistance, please call: 1-800-272-7033]
Tunnel Mode
Encrypted
Supported Feature
: Windows XP, Windows 2000, Windows
Me, Windows 98SE (in IPv4)
: Windows XP Service Pack 1 or later (in
IPv6)
: Internet Explorer 6.0 or later
: Static global address service (A global
address must be set up to the WAN side of
the router.)
: "IPv4/IPv6 Dual-Stack" or "IPv6 over IPv4
Tunneling" service
: Services for multiple global addresses (A
global address must be set up to the
camera.)
: "IPv4/IPv6 Dual-Stack" or "IPv6 over IPv4
Tunneling" service
Operating Instructions
53