Configuring Multiple Cameras - Panasonic BB-HCM371A Operating Instructions Manual

2.17 Configuring Multiple Cameras

The Multi-Camera Setup page allows you to configure the camera IP addresses
and camera names to view multiple images on the Multi-Camera page. These
configurations are required to use the Multi-Camera page. Up to 12 cameras can
be configured.
1.
Click [Multi-Camera] on the Setup page.
2.
Click [Add].
Notes
• If you click the camera number, the modification page is displayed. The
camera setting can be modified or deleted on it.
• If you configured multiple cameras, you can change the camera number.
Select the number, and click [Move].
3.
Set each parameter.
• Clicking [Cancel] cancels your settings without saving changes.
Note
If the cameras will be accessed from the Internet, be sure to use the global IP
address. In this situation, local IP addresses such as 192.168. x.x cannot be
used.
[For assistance, please call: 1-800-272-7033]
Operating Instructions
87