Panasonic BB-HCM371A Operating Instructions Manual page 96

Operating Instructions
Setting
Server IP
Address or
Host Name
Port No.
Login ID
*2
Password
Login Timing •
Upload File
Name
*1
Overwrite
Setting
Data
Transfer
Method
But [Space], ["], ['], [&], [<] and [>] are not available.
*1
But ["] is not available.
*2
96
• If you set the server IP address, set 4 digits (0—255) and 3
periods such as "192.168.0.253". But "0.0.0.0" and
"255.255.255.255" are not available. Or set a host name (1—
*1
255 characters).
• You can set IPv6 address.
• Enter the number (1—65535). Usually set to 21.
• If your ISP requires a login ID, set it (0—63 characters).
• If your ISP requires a password, set it (0—63 characters).
*2
Select the login timing to an FTP server. If you set [One Time]
during 1-minute transfer, the camera logs in to the server only
once, and can reduce the time to log in or log out.
• Set the file name to save on an FTP server. Enter 1—234
characters. Entering "\" creates directories for a file. (E.g.
NetworkCamera\image.jpg)
• Selecting [Overwrite File] saves and overwrites the image on
the server. Selecting [Save as New File with Time Stamp]
saves the image attaching time stamps on the file name, and
the images are not overwritten.
• Select [Passive Mode] normally. If FTP does not work, select
[Active Mode] and check the operation.
Description