Panasonic BB-HCM371A Operating Instructions Manual page 59

Setting
IPsec
Encoding strength
7.
Click [Restart].
8.
Set up your VPN router as shown below.
• To use tunnel mode, you need to set up your VPN router.
IKE Items
Phase 1
• Check the box to enable IPsec features. If you clear the
box, whole IPsec features will be invalid.
• Encoding strength for IPsec can be selected. If you select
[Standard], DES or NULL is valid as an algorithm, and then
the data will become easier to be decrypted.
Authentication
Method
ID
Mode
Diffie-Hellman
MODP Group
Cipher Algorithm
Message-Digest
Algorithm
Lifetime
[For assistance, please call: 1-800-272-7033]
Description
Settings
Pre-shared Key Method
Specifies by address.
Main mode
*1
Specifies 1 or 2.
Select from DES-CBC, 3DES-CBC or
AES-CBC (128, 192, 256 bits). (Multiple
selections are available.)
HMAC-MD5, HMAC-SHA-1
Specifies by 28800 s (Byte setting is not
supported.)
Operating Instructions
59