Package Contents; Using The Included Floor Pads For Speakers (Cs-255Dab Only); Using The Remote Controller; Replacing The Battery - Onkyo CR-255DAB Instruction Manual

Package Contents

Make sure you have the following items:
CD Receiver (CR-255DAB)
Remote controller (RC-823S)
Indoor FM antenna
Power cord
Make sure to use a compatible power cord for your area.
(Connector type varies from country to country.)
■ CS-255DAB only
Speakers are included only with the CS-255DAB.
Speakers (D-T15)
Speaker cables
8 floor pads
* In catalogs and on packaging, the letter at the end of
the product name indicates the color. Specifications
and operation are the same regardless of color.
Using the Included Floor Pads for
speakers (CS-255DAB only)
You can improve the sound quality by attaching the
included floor pads to raise the speakers off the surface
and reduce the contact area. The floor pads also make
the speakers stable and prevent them from slipping.

Using the Remote Controller

Remove the plastic film before using the remote
controller.
6
Floor pads
Bottom
D-T15
When using the remote controller, point it toward the
CD receiver's remote control sensor, as shown below.
Remote control sensor
30°
30°

Replacing the Battery

Use only a battery of the same type (CR2025).
Squeeze and pull to release the
battery cover latch. You can
remove the battery door with your
fingernails by using the spaces
set back in wall.
Positive ⊕ side
Note:
• If the remote controller doesn't work reliably, try
replacing the batteries.
• If you intend not to use the remote controller for a long
time, remove the batteries to prevent damage from
leakage or corrosion.
• Expired batteries should be removed as soon as
possible to prevent damage from leakage or corrosion.
Caution:
• Replacing the battery incorrectly may cause an
explosion. Use only a battery of the same type or an
equivalent.
CR-255DAB
Back side