Firmware Upgrade Recovery - ATEN KN2100VA Series User Manual
Kvm over ip switch
Hide thumbs
Also See for KN2100VA Series:
- User manual (321 pages) ,
- User manual (334 pages) ,
- User manual (338 pages)
Table of Contents
Advertisement
Chapter 10. Maintenance
Firmware Upgrade Recovery
Should the switch's main firmware upgrade procedure fail, and the switch
becomes unusable, the following firmware upgrade recovery procedure will
resolve the problem:
1. Power off the switch.
2. Press and hold the Reset Switch in (see reset button, page 14).
3. While holding the Reset Switch in, power the switch back on.
This causes the switch to use the original factory installed main firmware
version. Once the switch is operational, you can try upgrading the main
firmware again by logging on to the KVM over IP switch via web browser (see
Main Firmware Upgrade, page 214).
215
- Quick Links:
- Management
Hide quick links:
Advertisement
Table of Contents
