ATEN KN2100VA Series User Manual page 268

Kvm over ip switch
Hide thumbs Also See for KN2100VA Series:
Table of Contents

Advertisement

KVM over IP User Manual
electrician to replace your obsolete outlet. Do not attempt to defeat the
purpose of the grounding-type plug. Always follow your local/national
wiring codes.
 Do not allow anything to rest on the power cord or cables. Route the
power cord and cables so that they cannot be stepped on or tripped over.
 If an extension cord is used with this device make sure that the total of the
ampere ratings of all products used on this cord does not exceed the
extension cord ampere rating. Make sure that the total of all products
plugged into the wall outlet does not exceed 15 amperes.
 To help protect your system from sudden, transient increases and
decreases in electrical power, use a surge suppressor, line conditioner, or
un-interruptible power supply (UPS).
 Position system cables and power cables carefully; Be sure that nothing
rests on any cables.
 When connecting or disconnecting power to hot-pluggable power
supplies, observe the following guidelines:
 Install the power supply before connecting the power cable to the
power supply.
 Unplug the power cable before removing the power supply.
 If the system has multiple sources of power, disconnect power from the
system by unplugging all power cables from the power supplies.
 Never push objects of any kind into or through cabinet slots. They may
touch dangerous voltage points or short out parts resulting in a risk of fire
or electrical shock.
 Do not attempt to service the device yourself. Refer all servicing to
qualified service personnel.
 If the following conditions occur, unplug the device from the wall outlet
and bring it to qualified service personnel for repair.
 The power cord or plug has become damaged or frayed.
 Liquid has been spilled into the device.
 The device has been exposed to rain or water.
 The device has been dropped, or the cabinet has been damaged.
 The device exhibits a distinct change in performance, indicating a need
for service.
 The device does not operate normally when the operating instructions
are followed.
250

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents