Port Level Browser Gui Interface - ATEN KN2100VA Series User Manual

3. Select the port you want to receive the permissions.
4. Click Paste.
 When you have finished making your configuration changes, click Save.

Port Level Browser GUI Interface

If a port is chosen in the Sidebar, the Main panel looks similar to the one shown
below:
The port access settings are explained in the following table:
Name Each port accessible to the user is listed under the Names
column.
Access The Access column is where device access rights are set. To
cycle through the choices, click the icon in the row that
corresponds to the user you want to configure. The meanings of
the icons are as follows
The user can view the remote screen
and can perform operations on the
Full Access
remote server from his keyboard and
monitor.
The user can only view the remote
View Only screen; he cannot perform any
operations on it.
No access rights - the Port will not show
No Access
up on the User's list on the Main Screen.
Chapter 6. Port Access
137