Scan; Array - ATEN KN2100VA Series User Manual

KVM over IP User Manual
 Outlets that are On have their icons in Amber; the icons are Gray for
outlets that are Off.
 To access and operate a port, double-click its icon. Port operation details
are discussed in Chapter 12, Port Operation.
Note: 1. In the Browser version, you can open as many port viewers as
there are ports, but the number of ports that you see depends on
the number of buses that the switch supports. For example, if the
switch supports 4 buses, the 5th viewer displays the same port as
the 1st viewer; the 6th viewer displays the same screen as the 2nd
viewer, etc.
In the AP GUI version you can only access one port at a time. To
see two different ports, you would have to log in two separate
times.
2. If the CC Management function is enabled (see page 186), Blade
Servers do not appear in the Sidebar, even if they are configured
on the switch. This is because they are managed via the CC
server.

Scan

Scan is found at the bottom of the AP GUI Sidebar. It automatically
switches among all the ports that are visible in the Sidebar (see Filter,
below), at regular intervals, so that their activity can be monitored
automatically. See Auto Scanning, page 232, for details.
Note: This item doesn't appear at the bottom of the Sidebar in the Browser
version. In that version, you must invoke it from the port's Toolbar. See
The Port Toolbar, page 230 for details

Array

Array is found at the bottom of the AP GUI Sidebar. It represents
another way of monitoring port activity. Under this function your
screen is divided into a grid of panels, with each panel showing the video
display of a particular port. Only ports that are visible in the Sidebar (see Filter,
below), and that are on line are displayed – all other ports are blank. See Panel
Array Mode, page 235 for details
Note: This item doesn't appear at the bottom of the Sidebar in the Browser
version. In that version, you must invoke it from the port's Toolbar. See
The Port Toolbar, page 230 for details
116