ATEN KN2100VA Series User Manual page 37

No. Component
1 grounding
terminal
2 power switch
3 secondary LAN
port
4 KVM ports
5 power sockets
6 primary LAN
port
7 local console
port(s)
The wire used to ground the unit connects here.
These standard slide switches power the unit on and off.
The cable that connects the unit to the backup network
interface (10/100/1000 Mbps) plugs in here.
The Cat 5e cables that link the unit to the KVM Adapter
Cables (which connect to the servers), plug in here.
The power cable(s) plugs in here. The left power socket
corresponds to the left power switch, and the right power
socket corresponds to the right power switch.
The cable that connects the unit to the primary network
interface (10/100/1000 Mbps) plugs in here.
The unit can be accessed via a local console as well as over
the net. The local console devices (USB keyboard, USB
mouse, DVI-I monitor) plug in here.
Chapter 1. Introduction
Description
19