Port Level Ap Gui Interface - ATEN KN2100VA Series User Manual

KVM over IP User Manual

Port Level AP GUI Interface

If a port is chosen in the Sidebar, the Main panel looks similar to the one below:
The page is essentially the same as the one for the Browser GUI (see page 137),
with the exception that there are filters at the top of the columns. The filters
allow you to expand or limit the scope of the users and groups that are
displayed, as described in the following table:
Filter
Name
Access All
Full Access Only Users and Groups with Full Access permissions appear in
View Only
No Access Only Users and Groups with No Access permissions appear in
140
To filter on the User or Group name, key in the name, partial
name, or partial name and wild card ( * ) then press Enter. Only
the Users and Groups whose names correspond to what you
have keyed in appear in the list.
All Users and Groups appear in the list.
the list.
Only Users and Groups with View Only permissions appear in the
list.
the list.
Description