ATEN KN2100VA Series User Manual page 172

KVM over IP User Manual
3. Enter the required information in the appropriate fields. A description of
each of the fields is given in the table below:
Field
Username
Password
Confirm Password
Description
Role
154
From 1 to16 characters are allowed depending on the
Account Policy settings. See Encryption, page 194.
From 0 to 32 characters are allowed depending on the
Account Policy settings. See Encryption, page 194.
To be sure there is no mistake in the password, you are
asked to enter it again. The two entries must match.
Additional information about the user that you may wish to
include.
There are three categories: Super Administrator,
Administrator and User. There is no limitation on the number
of accounts that can be created in each category.

The Super Administrator is responsible for the overall
installation configuration and maintenance; user
management; and device and port assignments. The
Super Administrator's permissions (see page 155) are
automatically assigned by the system and cannot be
altered.

The default permissions for Administrators include
everything except Force to Grayscale, but the permissions
can be altered for each Administrator by checking or
unchecking any of the permissions checkboxes.

The default permissions for Users include the Win, Java,
and SSH clients, but the permissions can be altered for
each User by checking or unchecking any of the
permissions checkboxes.
Note: Users who have been given User Management
privileges cannot access or configure Groups.
Description