Table of Contents
Advertisement
4. Mount the black housing of the rotary travel sensor 4 in
parallel to the mounting bracket 6 in a longitudinal direc-
tion.
5. Mount the product 1 or the external rotary travel sensor 7
with the adapter 4 on the mounting bracket 6.
6. Note the direction of the scale 8.
ð View from below of the travel sensor 7 with mounting
bracket 6.
www.gemu-group.com
8.10 Direct mounting to quarter turn actuators
1
7
4
8
6
4
7
1
6
8
8
4
1. Mount the travel sensor mounting kit on the product (see
"Linear travel sensor mounting kit assembly for remote
mounting", page 12).
2. Use the mounted mounting kit to screw the product 1 onto
the adapter 4.
3. Use the spanner flat 8 (WAF 27) of the travel sensor to
tighten the product 1.
4. Turn the housing clockwise to align the pneumatic or elec-
trical connections.
5. Connect the product's pneumatic supply and connect the
product to the process valve.
8.11 Remote mounting to quarter turn actuators
▶ The travel sensor's cable exit protective coating is not UV-
resistant and must therefore be protected against direct
exposure to weather.
15 / 33
NOTICE
GEMÜ 1441 cPos-X
8 Montage
Advertisement
Table of Contents
