Table of Contents
Advertisement
14 Parameter list
- Loosen the display holder by removing the two internal
screws (Tx 10) and swivel it upwards/forwards.
GEMÜ 1441 cPos-X
13.1.3 Basic operation of the app
Parameter
Parameter settings
Search function for individual
parameters
Main menu
Action functions
- Carry out initialization
- Find device (localization)
Selected favourites view
The app has been developed in such a way that it can be oper-
ated intuitively. This overview only serves to explain the basic
navigation within the app. All other functions and setting op-
tions are described and explained directly in the app.
13.1.4 Emergency operation
If there is a fault in the product and/or the wireless interface,
the product has two internal buttons that can be used to per-
form the following actions. The buttons must first be exposed
by removing the cover.
Status
NoInit operating
mode
(not initialized)
AUTO, MAN, OFF,
TEST operating
mode
* The device is therefore simultaneously moved to the NoInit
operating mode and, as a result, allows the connected pro-
cess valve to be controlled manually using the two buttons
14 Parameter list
Number
Parameter Description
-
Local
Bluetooth
name
M02
Device
functions
M01
Operating
mode
24 / 33
Operating mode
Setting operating modes
AUTO = automatic mode
MAN = manual mode
Test = test mode
OFF = inactive
NoINIT = not initialized
INIT = initialization active
Device status
Operating time display
Bar charts
Status display
Left-hand button
Right-hand button
Manual control of
Manual control of
the valve actuator
the valve actuator
→ Pneumatic con-
→ Pneumatic con-
nection 2 is vented
nection 2 is aerated
Press and hold both buttons simultan-
eously for three seconds,
→ Delete the initialization and reset the
device to the default setting*
Settings
Locally
used
Bluetooth
name
Device op-
erating
mode (po-
sitioner...)
Device op-
OFF, AUTO,
erating
MANUAL,
mode
TEST
www.gemu-group.com
Initial set-
ting
Serial num-
ber of the
device
AUTO
Advertisement
Table of Contents
