Nortel NN43113-106 User Manual page 59

double press the Headset key, the feature is not enabled on your phone.
Before you can use a wireless headset with your phone, the feature must
be enabled by the system administrator. Contact your administrator to
find out if Bluetooth wireless technology functionality is available for your
use.
Note: Nortel recommends that you not pair more than one headset of
the same model, because they have identical names in the Paired
list.
To pair a wireless headset with your phone:
(Headset)
Configuring Local Menu options
1. Double-press the
the Bluetooth Setup dialog box.
The
Enable Bluetooth
highlighted.
If the Bluetooth Setup menu fails to open
when you double press the Headset key,
Bluetooth wireless technology feature is
not enabled on your phone. Contact your
administrator.
2. Press the
Enter
Bluetooth wireless technology.
A check mark appears to indicate that
the feature is activated. The message
"BT Enabled" appears at the bottom of
the display.
3. Put your Bluetooth technology headset
in its pairing or search mode. The
procedure for doing this can be different
for each headset. Refer to the
documentation that accompanied your
headset, or contact the vendor.
key to open
Headset
check box is
key to activate
59