Using Virtual Office - Nortel NN43113-106 User Manual

Additional phone features

Using Virtual Office

The Virtual Office feature provides a service you can use while you are
away from your desk to transfer calls, and all your office IP Phone
features, to a remote IP Phone. Virtual Office makes this possible by
allowing you to use another IP Phone (the Remote phone) to log in to
your own home or office IP Phone (the Office phone). After you log in, you
can access the DNs, autodial numbers, key layout, feature keys, and
voicemail features that are configured on your own home or office IP
Phone.
To use Virtual Office, you need your DN and preconfigured Station
Control Password (SCPW). You must activate Virtual Office on your
Office phone before you can connect to it from a Remote phone. See
"Logging in to Virtual Office" on page 133.
Consult your system administrator to verify if the Virtual Office feature is
available for your use.
You can use an IP Phone as a Remote phone to connect to your
IP Phone 1140E even if it is a different IP Phone model. Table 7 shows
the IP Phones on which you can use Virtual Office to connect to your
IP Phone 1140E.
Table 7: Virtual Office connection availability
Using IP Phone
IP Phone 1120E
IP Phone 1140E
IP Phone 1150E
IP Phone 1110
IP Phone 2001
IP Audio Conference
Phone 2033
IP Phone 2002
132
Possible to log in to the 1140E?
Yes, with restrictions
Yes
No
Yes, with restrictions
Yes, with restrictions
Yes, with restrictions
Yes