Enabling Onhook Default Path; Changing Feature Key Labels - Nortel NN43113-106 User Manual

Enabling OnHook Default Path

The OnHook Default Path option allows you to choose whether to use a
headset or the Handsfree feature to operate your IP Phone while it is on-
hook.To enable OnHook Default Path, press the
Options, and select
Telephone
To enable OnHook Default Path:
Select
or

Changing feature key labels

The Change feature key label option renames the label displayed next to
each feature key or restores the default labels to the keys (collectively or
individually). To rename feature key labels, press the
select
Telephone
Note: If a feature key is configured as an auto-dial key, the label does
not change if the auto-dial key configuration changes.
To rename the labels:
OnHook Default
1. Press the
highlight one of the following:
—
—
2. Choose one of the following:
— Press the
Cancel
— Press the
Options, and select
1. Press the
Configuring Telephone Options
Services
Path.
navigation keys to
Up/Down
Handsfree enable
Headset enable
Select
default path and return to the
Telephone Options
Cancel
existing configurations.
Change feature key
key.
Enter
key, select
soft key to save the
menu.
soft key to keep
key,
Services
labels.
49