Mevb Configuration - Motorola M68MPB334 User Manual

HARDWARE PREPARATION AND INSTALLATION

2.3 MEVB CONFIGURATION

The MEVB contains:
• MPB – MCU-device-specific board that defines which MCU is evaluated.
• M68MPFB1632 Modular Platform Board (MPFB) – which provides the
interface connections to the host computer, logic analyzer connections, and
the platform for installing the MPB. For more information about the MPFB
and MEVB system connections, refer to the M68MPFB1632 Modular
Platform Board User's Manual, M68MPFB1632/D. Chapter 3 contains
information to help you get started using your MEVB.
To install the MPB on the MPFB (refer to Figure 2-2):
1. Inspect all connectors for bent or damaged pins.
2. Align the MPB reference mark with the MPFB reference mark.
3. Rotate the MPB until the four MAPI bus connectors on its bottom mate
4. Firmly press the MPB onto the MPFB.
2-8
Turn OFF MPFB power when installing the MPB on the MPFB or
removing the MPB from the MPFB. Sudden power surges could
damage MEVB integrated circuits.
with the MAPI bus connectors on the top of the MPFB. (There is only one
way to connect the MPB and the MPFB.)
Support the bottom side of MPFB when installing the MPB on the
MPFB. Excessive flexing of the MPFB could damage the printed
circuit.
CAUTION
CAUTION
M68MPB334UM/D