Table of Contents
Advertisement
MEVB QUICK START GUIDE
3.4 SOFTWARE INSTALLATION AND MCU INITIALIZATION
After you have set up the MEVB hardware you must install the software on your
computer. Follow the installation procedure in the appropriate software operations
manual.
The MCU must be initialized before the MEVB will function. The following is
one possible initialization for the MPB334. You may adapt this example to your
debugger. This initialization enables the maximum system clock frequency and
disables the software watchdog while enabling the bus monitor. CSBOOT is set to
zero-wait state and the block size set to 64K starting at $00000. A7 is initialized at
$10700 and the program counter (PC) is initialized to $00200 (A7=10700,
PC=200). Load your program at address $00200.
3-6
M68MPB334UM/D
Advertisement
Table of Contents
