Table of Contents
Advertisement
APOGEE Wireless User Guide
Parameter
Temp. Unit
Room Temp. COV (deg)
Room Temp. Sample Rate (sec)
RSX Poll Rate by WRTS (sec)
Display Always On
HMI/MMI Port Timeout (sec)
Battery Voltage COV (mV)
WRS Heartbeat (min)
Point Number for Room Temp.
Point Number for Room Setpoint Dial
Point Number for DI Override Switch
Point Number for Night Override
Point Number for Day/Night
Radio Channel
20
Table 4. WRS and RSX Configuration Settings.
Description
Display, sensing, and reporting
temperature unit: Fahrenheit or
Celsius.
Maximum temperature change of
value allowed before the WRS
reports the current temperature to its
RSX/TEC.
Frequency with which the WRS
wakes up and takes a temperature
reading.
Frequency with which the WRS
wakes up and polls the RSX for
messages.
LCD always shows the current
temperature or only after someone
pushes a button.
Length of time the WRS remains
awake after the HMI port is accessed.
Maximum change in battery voltage
allowed before the WRS reports the
current voltage to its RSX/TEC.
Maximum time allowed for no
communication with the RSX/TEC.
After this, the WRS wakes up and
reports its presence to the RSX/TEC.
Point number used in TEC
application.
Point number used in TEC
application.
Point number used in TEC
application.
Point number used in TEC
application.
Point number used in TEC
application.
Channel used by the RSX/WRS
pair. The AUTO value enables the
automatic channel-changing feature.
Default
Value
Fahrenheit
− View the current
values, use the PARAM
WRS command.
0.5
– Change the value(s),
use the SET WRS
command.
− View the factory
60
detault values, use
the DEFAULT WRS
command.
60
Yes
300
50
5
4
13
19
21
29
AUTO
– View the current
values, use the PARAM
RSX command.
– Change the value(s),
use the SET RSX
command.
− View the factory
detault values, use
the DEFAULT RSX
command.
Revision Date: July 10, 2008
Siemens Building Technologies, Inc.
To:
Advertisement
Table of Contents
