Table of Contents
Advertisement
About This User Guide
This user guide is written for System Specialists, Service Specialists, Technical Engineers, and District
Automation Specialists who want to plan, design, and maintain the Wireless Room Sensor Solution.
How This Guide Is Organized
This user guide is organized as follows:
•
Chapter 1–Quick Start provides quick start steps for getting the Wireless Room Sensor Solution
operating.
•
Chapter 2–About the Wireless Room Sensor Solution provides information about the Wireless
Room Sensor Solution.
•
Chapter 3–Preparing for Wireless Communications provides recommendations and guidelines for
designing the Wireless Room Sensor Solution.
•
Chapter 4–Setting Up the WRS/RSX Pair provides details for starting up and configuring the
Wireless Room Sensor Solution.
•
Chapter 5–Modifying the WRS/RSX Pair provides procedures for modifying setup and operation of
the Wireless Room Sensor Solution.
•
Appendix A–Troubleshooting (Advanced Users) provides helpful procedures for troubleshooting
the Wireless Room Sensor Solution.
•
Appendix B–Powering RSX Using 9 Vdc Battery provides details on using a 9 Vdc battery to power
the RSX when performing site surveys.
•
Appendix C–Wireless TEC Commissioning and Balancing provides information on using the
wireless WRS/RSX communications link to configure the TEC device using a tool.
•
Appendix D– Wireless Channels provides details on how channels are selected on the wireless link
and how the automatic channel changing feature works for the Wireless Room Sensor Solution.
Document Conventions
The following table lists conventions to help you use this user guide in a quick and efficient manner.
Numbered Lists (1,2,3...) indicate a procedure with
sequential steps.
The arrow symbol signifies a one-step procedure.
Revision Date: July 10, 2008
Siemens Building Technologies, Inc.
Convention
Wireless Room Sensor Solution
Example
1. Turn OFF power to the field panel.
2. Start the device.
Click Start.
5
Advertisement
Table of Contents
