Changing The Name Of A Song; To Change The Name Of A Song - Korg ToneWorks PXR4 Owner's Manual

Operation
If you are in the middle of the song, press the [REW] key
to move to the beginning of that song, and then press the
[REW] key once again to move to the previous song.
When you switch songs, the volume level of each track will
change to the level at which the faders were when you
switched songs. Please be aware that depending on the fader
settings, playback may occur at a high volume.

3. Changing the name of a song

A newly created song will be named "NEW SONG." So
that you will be able to tell your songs apart, we recom-
mend that you change the song name. A song name of up
to 16 characters can be assigned.
Characters available for a song name

To change the name of a song

Select the song whose name you want to change.
1
"2. Selecting a different song"
Press the [SYSTEM] key, and then use the [CUR-
2
SOR] up/down keys to display "EditSong" (edit
song).
24
Press the [CURSOR] right key to display "Name-
3
Song" (name song).
Press the [CURSOR] right key to access the song
4
name edit page.
The character that can be changed will blink.
Use the dial to edit the song name.
5
The character will change as you turn the dial. To
move to a different character to change, press the
[CURSOR] right/left keys.
When you are finished entering the name, press the
6
[CURSOR] down key.
The display will ask "NameOK?," so use the dial to
select "Yes," and then press the [CURSOR] right key. If
you select "No," the previous name will reappear.