Table of Contents
Advertisement
P.1-3 Cabinet: Cabinet module
1. Cabinet...................................................................... [***]
Select the type of cabinet.
P.1-4 Modulation: Modulation module
1. Modulation ................................................................ [***]
Select the type of modulation.
P.1-5 Ambience: Ambience module
1. Ambience .................................................................. [***]
Select the type of ambient effect.
P.1-6 NR/Gate: NoiseReduction/Gate module
1. NR/Gate ........................................................ [000...100]
P.1-7 ProgMVol: Program master volume
1. ProgMVol ....................................................... [000...100]
P.1-8 EffectReturn: Effect return level setting
1. EffRetLv .......................................................... [000...100]
When MASTER is selected as the effect insert location
(ASSIGN), this setting adjusts the return level from the
effect to the master bus. Increasing the return level will
cause the effect to be applied more deeply (wet).
If a setting other than "MASTER" is selected for effect assign,
this page will not be displayed.
P.1-9 EffectBalance: Effect return balance setting
1. EffRtBal....................................................[L30...Cnt...R30]
When MASTER is selected as the effect type (EFFECT
ASSIGN), this setting adjusts the balance of the return
from the effect to the master bus.
If a setting other than "MASTER" is selected for effect type,
this page will not be displayed.
P.1-10 Rename, Write: Name and save an effect
1. RenameEffect ....................................................................
Here you can edit the name of the effect. Press the [CUR-
SOR] left/right keys to select the character that you want
to edit, and use the dial to select a character. When you
have finished editing the name, press the [CURSOR]
down key. The effect will be saved with this name when it
is saved.
2. Wrt>U##? .................................................... [##=00...99]
Select the save destination user area number. This opera-
tion writes the currently selected effect program into the
user area, saving it. ( p.39: "3. Saving an effect pro-
gram")
P2. Tuner: Tuner function
When Effect mode is selected, you can press the
[EFFECT/TUNER] key to enter Tuner mode. This allows
you to tune an input sound source. In Tuner mode, the
effect will be bypassed (i.e., the effect will not be applied),
so you can also use this mode to hear how the effect is
modifying the sound. Press the [EFFECT/TUNER] key
once again to return to the previous state.
The tuner will not operate during playback or record-
Parameters
65
Hide quick links:
Advertisement
Table of Contents
