Modulation Block - Korg ToneWorks PXR4 Owner's Manual

MODULATION BLOCK

1. MODULATION
Chorus (CHORUS)
StChorus (STEREO CHORUS)
These effects give the sound depth and warmth by modulat-
ing the delay time.
1. TIME ...................... [1...10]: Adjusts the delay time, controlling the
frequency range at which the effect
will apply. Adjusting this toward 0
will cause the modulation to occur at
a higher pitch.
2. -----(BLANK)......................
3. SPEED............ [0.1...10Hz]: Adjusts the speed at which the pitch
is modulated.
4. DEPTH................... [0...10]: Adjusts the depth at which the pitch
is modulated.
5. MIX ........................ [0...10]: Adjusts the amount of effect mixed
into the sound.
Flanger (FLANGER)
StFlange (STEREO FLANGER)
These effects give the sound modulation and a sense of pitch
movement.
1. TIME ...................... [1...10]: Adjusts the delay time, controlling the
frequency range at which the effect
will apply. Adjusting this toward 0
will cause the modulation to occur at
a higher pitch.
2. FEEDBACK..... [–10...+10]: Adjusts the unique character of
sound. Raising this setting appropri-
ately will produce a "jet" effect.
3. SPEED............ [0.1...10Hz]: Adjusts the speed at which the pitch
is modulated.
4. DEPTH ................... [0...10]: Adjusts the depth at which the pitch
is modulated. When set to 10, the
TIME parameter has no effect.
5. MIX ......................... [0...10]: Adjusts the amount of effect mixed
into the sound.
ModDelay (MOD DELAY)
StModDly (STEREO MOD DELAY)
These effects can also modulate the delay time to produce
chorus or flanger-like effects.
1. TIME .................... [0...1.75]: Adjusts the delay time.
2. FEEDBACK ........ [0...+10]: Adjusts the feedback (repeated "ech-
oes").
3. SPEED ............[0.1...10Hz]: Adjusts the speed at which the pitch
is modulated.
4. DEPTH ................... [0...10]: Adjusts the depth at which the pitch
is modulated.
5. MIX ......................... [0...10]: Adjusts the amount of effect mixed
into the sound.
Tremolo (TREMOLO)
Trem/Pan (TREMOLO/PAN)
These effects simulate the tremolo that is built into some gui-
tar amps.
1. -----(BLANK) .....................
2. SPREAD .................[0...10]: Switches between tremolo and pan.
*For CHAIN5
-----(BLANK) .................... : *For TREMOLO
3. SPEED ............[1.0...10Hz]: Adjusts the speed of tremolo.
.........................[0.1...10Hz]: Adjusts the speed of tremolo.
*For CHAIN5
4. DEPTH ................... [0...10]: Adjusts the depth of tremolo.
5. -----(BLANK) .................... :
Effect parameters
77