Bounce - Korg ToneWorks PXR4 Owner's Manual

Parameters
Select this when you want to record while applying a ste-
reo effect.
MASTER: Stereo-in
Select this when you want to send the "Send" signals from
each track to the effect, enhancing the overall depth and
balance.
FINAL: Stereo-in
Select this when you want to make overall adjustments to
the song in the master LR bus.
(OFF):
The effect will not be used. Nothing will be displayed in
the Assign area if this is selected. The effect pages will not
be displayed if the assign setting is turned "OFF."

BOUNCE

+
Select the type of bounce recording. The mixer settings
will change according to the type you select, allowing var-
ious types of bounce operation. ( p.29)
Hold down the [SHIFT] key and press the [LOCATE] key
to switch this setting.
4 2 (4 tracks 2 tracks):
With this type, the track playback will be input to the
track(s) selected for recording by "REC SELECT." Select
this type when you have used up all four tracks, and want
to combine them into two tracks or one track. You can also
select this when you want to apply a master effect or final
68
stereo-out
stereo-out
effect to two already-recorded tracks, and record the result
on two other tracks.
2+2 2 (2 tracks + 2 inputs
With this type, the external input sources will be input to
the tracks selected for recording by "REC SELECT." This
type is used mainly when you want to listen to two tracks
while adding another performance (stereo input) and
recording the result on two tracks, or similarly when you
want to combine the playback of three tracks with one
audio input and record the result on one track.
DUB (Dubbing):
With this type, the external input sources and the track
playback will be input simultaneously to the tracks
selected for recording by "REC SELECT." This allows you
to add additional material to an already-recorded track
(however the levels cannot be adjusted independently).
You will select this mainly when you have already
decided on the part assignments of each track, and want
to layer sounds as if you were using a musical notepad.
CONV (Convert):
With this type, a completed song that you have already
recorded can be converted into a stereo MP2 song. By
converting a completed song, you will be able to send it to
your computer and play it back on a MPEG1 Layer 2 play-
back application. When you execute conversion, a new
song will be added as a playback-only stereo MP2 song.
This means that the tracks selected by "REC SELECT" will
not be overwritten. Mixer operation is the same as in 4 2.
2 tracks):