Trying Out The Functions; Changing The Tempo Of A Song Or Pattern; Using The Dial To Change The Tempo; Using The Tap Tempo Key To Change The Tempo - Korg Electribe SmkII Owner's Manual

○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○

Trying out the functions

Changing the tempo of a song or pattern

The tempo that you change here will return to the original tempo when you stop
playback and switch to a different pattern or song.

• Using the dial to change the tempo

1. Press the Mode key to enter Song mode or
Pattern mode.
2. Use the cursor [▲ ][▼ ] keys to set the param-
eter select LED to TEMPO.
3. Rotate the dial to change the tempo.
4. If you wish to adjust the tempo in more de-
tail, you can hold down the SHIFT key and
rotate the dial to modify the decimal por-
tion of the value.

• Using the Tap Tempo key to change the tempo

While a song or pattern is playing, press the Tap key three times or more at
the desired tempo. The ES-1
the Tap key, and will set the tempo accordingly. The tempo can also be changed
in this way even if the ES-1
Use the cursor [▲ ][▼ ] keys to make the parameter select LEDs indicate
TEMPO, and the tempo you modified will appear in the display.

Striking keys to play Parts

By striking the part keys, you can play the corresponding sounds.
The audio-in parts will sound when an audio signal is connected to the
audio input jacks. (☞ p.22, "Connecting various sources to the audio in-
puts.") However even if sound is being input, it will not be heard if Audio
In Thru is turned on.
The sound of a part consists of an assigned sample that has been modified
or processed, and will differ for each pattern. Rotate the dial to select vari-
ous patterns, and listen to the wide variety of sounds.
Pressing the Accent Part key will not cause the Accent part to sound. If the sample assigned
to sample part 1 or 3 is stereo, sample parts 2 or 4 will not sound. It is not possible to play
both sample parts 6A and 6B simultaneously, or both 7A and 7B simultaneously. It is not
possible to play a part to which a sample of "oFF" is assigned.
What is a Part?
A Part is the smallest unit that makes up a Pattern, and con-
sists of a sound and the timing (rhythm pattern) at which it is
played, effect on/off settings, and motion sequence data. There
are a total of twelve parts, as follows. (☞p.33 "Pattern mode")
• Sample parts (1—5, 6A-6B, 7A-B): A sample sound and a
rhythm pattern.
• Slice Sample part: A sample sound and a rhythm pattern.
• Audio In part: A rhythm pattern for the external input.
• Accent part: A rhythm pattern that specifies the points of emphasis (accents) for the entire pattern.
The sound can be modified independently for each part, and the rhythm pattern, effect on/off settings,
and motion sequence etc. are also stored individually for each part (☞p.35 "Editing the sound of a part").
Change the tempo of a song
2
II will detect the interval at which you pressed
mk
II is not currently playing a song or pattern.
mk
3. Basic operation (Quick Start)
Change the tempo of a pattern
3
2
1
Part
1 2 3 4
EDIT 5 6
SAMPLE
----------Motion sequence data------
(90.)
3
1
Three times
or more
7 8 64
---
15