Advanced - Smart Technologies Smart Board MX Series Installation And Maintenance Manual

Appendix B Adjusting display settings

Advanced

Option
Display
Walllpaper
Launcher
Home screen
HDMI out
Sleep
Brightness and volume
Auto
Manual
Volume
OTA
OTA server
Automatically check for
updates
smarttech.com/kb/171555
Values Function
[N/A] Sets the background image on the
display
[Apps] Select which apps appear in the
launcher.
[Apps] Select three apps to appear on the
home screen
480p Select the output resolution
1080p
4K
15 minutes When a time interval is selected, the
display's screen will turn off even if
30 minutes
the connected computer or device is
45 minutes
still on.
60 minutes
Always on
[N/A] Automatically sets the display's
brightness based on the room's
brightness.
[N/A] Sets the display's brightness level
[N/A] Sets the display's volume level
[OTA servers] Sets which server the display
connects to for updates
Note
The display must be connected to
the Internet to check for system
software updates.
Enable Enables or disables checking and
downloading updates for the
Disable
display's firmware
Notes
Only .png, .jpg, .bmp files are
supported
Save the wallpaper file to a
USB drive and insert it into the USB
port. See Connector diagrams on
page 47.
[N/A]
Tap the app you want to remove
from the home screen. Then select
the app you want to appear on the
home screen instead.
Ensure the device that is receiving
the display's HDMI out signal
matches the selected output
resolution.
If the iQ experience is selected, the
display's screen will not turn off
when a time interval is selected.
The ambient light sensor can detect
the room brightness and adjust the
display's screen brightness
Disable Auto to set the brightness
manually
[N/A]
Default is Auto.
Enabled by default.
If this is disabled, manually check for
updates in Update on page 98.
96