Smart Board Mx (V2 And V2-C) Series; Connector Panel - Smart Technologies Smart Board MX Series Installation And Maintenance Manual

Chapter 3 Connecting computers and other devices
No. Connector
3 USB 3.0 Type-B
connector
4 USB 2.0 Type-A
5 USB 2.0 Type-A
connector
SMART Board MX (V2 and V2-C) series

Connector panel

The following diagram and table present the connectors on the display's connector panel:
No. Connector
1 HDMI 2.0 out
2 USB 2.0 Type-A
3 USB 3.0 Type-A
4 USB 3.0 Type-B
smarttech.com/kb/171555
Connects to
HDMI 3 input (touch)
Supported USB drives,
peripherals, and other
devices
Supported USB drives
Side
Connects to
External display
[N/A]
Supported USB drives,
peripherals, and other
devices
HDMI 1 input (touch)
Notes
See page 36 and USB cables and
connectors.
See page 43 and USB cables and
connectors.
Connect a USB drive to update the
display's firmware.
Bottom
Notes
See Connecting an external display on
page 45 and HDMI cables and
connectors.
This connector is a service port.
See page 43 and USB cables and
connectors.
See page 36 and USB cables and
connectors.
49