Chapter 2 Installing The Display; Moving The Display To The Installation Site - Smart Technologies Smart Board MX Series Installation And Maintenance Manual

Chapter 2 Installing the display

Moving the display to the installation site
Using transportation aides
Accommodating doorways, hallways, and elevators
Dealing with cracked, chipped, or shattered glass
Saving the original packaging
Installing the display on a wall
Choosing a location
Choosing a height
Assessing the wall
Selecting mounting hardware
Selecting a wall mount
Mounting the display
Installing the display on a stand
Using SMART mobile stands
Using a third-party stand
Installing the iQ appliance and Intel Compute Card
Connecting the Intel Compute Card
Connecting to a network
AM50 iQ appliance
Connecting power and turning on the display for the first time
About energy saving modes
SMART recommends that only trained installers install the display.
This chapter is for installers. Installers should read this information along with the installation instructions
included with the display before they install the display.
Warning
Improper installation of the display can result in injury and product damage.

Moving the display to the installation site

After your organization receives the display, you need to move it to the place where you plan to install it.
On occasion, you might also need to move the display to another location after initially installing it.
smarttech.com/kb/171555
20
21
21
22
22
22
23
25
25
26
26
26
28
28
28
28
29
29
30
31
33
20