System Settings - Smart Technologies Smart Board MX Series Installation And Maintenance Manual

Appendix A Adjusting iQ settings

System settings

Option
System
Access to USB mass
storage devices
Advanced Options
SMART Board with iQ
Default input
Advanced Pen & Touch Settings
Touch controller
firmware version
Automatically update the
touch controller
Power
Turn screen off after
Energy Saver
smarttech.com/kb/171555
Values Function
On Enables or disables access to a USB
drive.
Off
On Enables or disables the iQ
experience.
Off
Inputs available Select the default input the display
on the display. will use when starting.
Update or roll back the touch
[N/A]
controller firmware version.
[N/A] Select to update whenever a new
version of the touch controller
firmware is released.
Disabled Sets the number of minutes of
inactivity before the display goes in
1 min
to an energy saving mode.
5 mins
30 mins
1 hour
1.5 hours
2 hours
5 hours
10 hours
Notes User or system
setting
This option is not System
available for
SMART Board
MX series
displays.
This option is not System
available for
SMART Board
MX series
displays.
The iQ System
embedded
experience is the
default input.
This option is not
available for
SMART Board
MX series
displays.
[N/A] [N/A]
[N/A] [N/A]
The default is 60 System
minutes.
This option is not
available for
SMART Board
MX series
displays.
81