Cleaning And Maintaining Hardware; Turning Off, Turning On, And Resetting Smart Board Mx Series Displays; Checking The Display Installation; Cleaning The Screen - Smart Technologies Smart Board MX Series Installation And Maintenance Manual

Chapter 4 Maintaining the display

Turning off, turning on, and resetting SMART Board MX series displays

To turn the display off
Press the Power button
To turn the display back on
Press the Power button
To reset the display
1. Flick the switch to the OFF (O) position.
2. Flick the switch to the ON (|) position.
The display and iQ appliance reset.

Cleaning and maintaining hardware

Checking the display installation

Inspect the display installation frequently to ensure that the display remains securely installed.
Check the mounting location for signs of damage or weakness that can occur over time.
l
Check for loose screws, gaps, distortions, or other issues that could occur with the mounting
l
hardware.
If you find an issue, contact a trained installer.

Cleaning the screen

Follow these instructions to clean the screen without damaging its anti-glare coating or other product
components.
Caution
Do not use permanent or dry-erase markers on the screen. If dry-erase markers are used on the
l
screen, remove the ink as soon as possible with a lint-free, non-abrasive cloth.
Do not rub the screen with dense or rough material.
l
Do not apply pressure to the screen.
l
smarttech.com/kb/171555
on the front control panel for two seconds.
on the front control panel.
56