Table of Contents
Advertisement
SMART I
NSTALLATION
Viewing
Consider the seating around the mounted product. If participants will be
angle and
sitting at a steep angle (such as in a lecture hall) relative to the display, you
area
may have to adjust the installation height or angle. SMART's interactive
displays are designed for vertical mounting only: 90° relative to the floor,
plus or minus 5–15° for tolerance, depending on the product (consult the
product's documentation). SMART doesn't support mounting these products
at other angles or in a horizontal orientation.
NOTE:
Table.
The recommended viewing angle and area also depend on the display's
resolution
such as ambient lighting. SMART recommends user's sit within the 178°
viewing area, shown in the diagram below.
See SMART's knowledge base article,
and viewing angles for SMART Board interactive displays
information about viewing angles.
Room control system and power management
A room control system enables users to control a room's lighting, sound system, and possibly
the SMART product you're installing. Some installations may require you to integrate the
product with a room control system. Refer to the product's installation or administrator's guide
to see if it works with an external room control system.
9 smarttech.com/kb/171035
S
TANDARDS
The only product that supports a horizontal orientation is the SMART
and a variety of other factors that can affect the display's visibility,
Recommended viewing distances
for more
Advertisement
Table of Contents
