Temperature And Humidity Sensors; Microphone Array; Mounting Hardware; Accessory Mounting Points - Smart Technologies SMART Board 6000S User Manual

Chapter 1
Welcome

Temperature and humidity sensors

The display features integrated temperature and humidity sensors that enable real-time
measurement and recording of the environmental conditions surrounding the display.
This data is easily accessible using the temperature and humidity app in the display's App
library.
NOTE
Temperature and humidity sensors are available only when iQ is enabled.
For more information, see Using the SMART Sensors app on page 41.

Microphone array

This feature is available only on the SMART Board 6000S (V3) and SMART Board 6000S (V3)
Pro models.
NOTE
The SBID-64xxS (V3) Pro models do not feature a microphone array.
You can use the display's built-in microphone array while using a conferencing app on the display. The
microphone array provides improved sound detection. You can also use the display's built-in microphone
array in place of a connected computer's microphone.
For more information, see Using the microphone array on page 31.

Mounting hardware

The display comes with a WM-SBID-200 wall mount, which your organization can use to mount the display
on a wall.
You can also mount the display on a wall or mobile stand (see Accessories on page 18).

Accessory mounting points

The display features M4 mounting points located at the top-left and top-right for SMART approved
accessories.
smarttech.com/kb/171415 15