Cleaning The Parts (Cleaning Methods) - Mitsubishi Electric MSZ-AH09VA-H1 Operating And Installing Instructions

Cleaning The Parts
Caution:When the unit is used in places where there is lot of dust and smoke and places such as kitchens where there is oil
dirt,please remove the strainer from the indoor unit if you feel it is too dirty.
Air strainer
1. Use vacuum cleaner to remove the dust or wash it with water.
2. Wipe the water off with a soft cloth and dry it in the shade.
Caution
Don't use a brush or broom to rub the strainer.
If the dirt is noticeable,wash the strainer with a solution
of mild detergent diluted in lukewarm water.After it is
rinsed,install it after drying in the shade.
Do not expose the air strainer to direct sunlight or heat
from a fire or use air blowers when drying it.This may
cause deformation or discoloration.
Don't use hot water above 50℃ to clean it.
Panel
(If dirt is detected)
Please use soft cloth to clean it.
Caution
If the dirt is noticeable,wash it with a solution of mild detergent
diluted in lukewarm water.
Don't use gasoline,volatile oil,thinner,rubbing powder and etc.
Don't use hard objects such as brush and sponge to clean it.
Don't bath the panel directly.
Do not expose it to direct sunlight or heat from a fire or use
air blowers when drying it.This may cause deformation or
discoloration.
For PAH series,it is strongly prohibited to use the cleaning liquid
clearly marked not to be used for metallic products to scrub the
panel of the indoor unit.
Heat exchange
(When dirt is detected)
First remove the air strainer.
Air outlet,horizontal vanes,vertical vanes and vanes
Please clean them with soft cloth.
20
(Cleaning Methods)
※Press the strainer securely
and don't make it deformed.
Remove the dust with a vacuum
cleaner (With brush)
Caution
When the brush is used,don't brush
it with force.
Please put on gloves to do it.
Don't use corrosive liquid to scrub it.
Caution
Please confirm the fan stops.
If the dirt is noticeable,wash it with a solution of mild detergent diluted
in lukewarm water.
Don't use gasoline,volatile oil,thinner,rubbing powder and etc.
Do not expose it to direct sunlight or heat from a fire or use air blowers
when drying it.This may cause deformation or discoloration.
Please don't apply high external force on the internal vanes.This may
cause break.
(When dirt is detected)