Human Sense Move Eye Control Operation - Mitsubishi Electric MSZ-AH09VA-H1 Operating And Installing Instructions

Human Sense MOVE EYE Control Operation

Human Sense MOVE EYE can detect the temperature of floor and wall and location and
activity of persons and control the actually I FEEL temperature by persons,controlling
air temperature by taking people as the center.
Measure the floor temperature
Human Sense MOVE EYE can avoid
overheating or subcooling through
measuring the floor temperature and
room temperature at the same time.Each
time of running,the Human Sense MOVE
EYE will detect the changes of the room
temperature and activity of people and
correctly memorize the shape of the room.
The detection range of Human Sense MOVE EYE
The Human Sense MOVE EYE can detect temperature in a scope covered in a wide angle of 150°,except the
following range.
·The wall where the air conditioner is mounted
·The place right below the air conditioner
·Places where there is block (furniture,etc.) between the air conditioner
In the following cases,Human Sense MOVE EYE can't correctly detect people,windows and doors.
·In the mid summer when the air conditioner just starts,the temperature of the floor and wall is high
·When you are covered in quilts or wear heavy clothes without skin exposed
·When there are objects whose temperature changes greatly in short time
Display of the area display section
When the air conditioner runs with Indirect flow·Direct flow·Circulation,display the areas where the air
conditioner is controlling the air.
When the air conditioner runs with Direct flow and Indirect flow,display the area where there are people currently.
When the air conditioner runs with Circulation:display the memorized living area.
Set Indirect flow·Direct flow function. From the start of operation till when the place where there are people is detected,the
indicator is on all the time.
In the following case,the area display section will be of no display.
·When the「I FEEL」function is set to「Off」
·When the airflow direction is set to what you want
·In the situation of「Circulation」,press the button
Based on the different indoor unit mounting locations set by the remote controller,when there are people right in front of the
indoor unit,the places which light on the indicator are also different.
<When there are people right in front of the indoor unit,the light status of the indicator>
Mounted in the center
Area display
section
When the air conditioner is of the initial settings in the factory,the「I FEEL」function is set to「On」.
The function I FEEL is set to「On」
Direct flow·Indirect flow mode
Detection of the activity area
of people
Only adjust the air at places where
there are people and control the room
temperature based on the activity of
the people.
全室送风
Mounted in the left Mounted at the right
Area display
section
Control of the memory about
people's living area
Memorize the area where people
always stay as the living area.Set the I
FEEL function to "on" and begin to keep
a memory of the living area.Select to
run the air conditioner with Circulation
to realize the operation with a uniform
temperature in the living area.
one more time
Area display
section
Circulation mode
Area display
section
7