Table of Contents
Advertisement
Quick Heating Mode
At the beginning of Heating operation,quick heating may be desired.
The unit can't carry out Quick Heating operation in the mode other than heating mode.
When the start of the unit is timed,the Quick Heating operation can't run.
Cool Feeling Operation
It can be used when you want to enjoy healthy,comfortable and power saving Cooling
operation.
<Open the lid>
In「Indirect flow」mode,cool feeling operation can't be set.
At the upper and lower limits of the swing range,the vanes will stay for a while.
12
During the Heating operation and in the I FEEL
mode,press the
Enter Quick Heating mode.
The airflow velocity is switched to「Auto」and the horizontal air direction is
switched to「Auto」,the vertical air direction to「Direct flow」.
To release
Press the
It can also be released when the
buttons are pressed,the operation mode is switched and the horizontal
air direction and the vertical air direction are switched.
Quick Heating mode will be released automatically 1 hour after the start.
When the Quick Heating mode is released,the airflow velocity and direction
will be resumed to the status before Quick Heating mode is set.
Details about Quick Heating Mode
Within about 15 minutes,the unit runs at a powerful capacity to improve
the outlet air temperature and runs with the set temperature increased
by about 3℃.
To quickly increase the outlet air temperature,the upper part of the
horizontal vane may blow air horizontally and the lower part may do that
downward.
The Quick Heating operation is effective in the I FEEL mode.
In the Cooling mode,press the
「Cool feeling」will be displayed on the remote controller and「swing」be
displayed for the horizontal air direction.
To release
Press the
button once again
It can also be released,when the
pressed.
button
button once again
、
、
、
、
、
button
and
buttons are
Advertisement
Chapters
Table of Contents
