Usb Driver Installation Procedure; Driver Confirmation - Fujitsu MB2147-01 Application Note

USB Driver Installation Procedure

The installation procedures for the USB driver are as follows:
1. Copy SiUSB.dll under the " Softune\bin " directory
2. Copy wdapi901.dll under " windir\system32 " directory.
"Windir" is a directory path defined by the system
environment variable of Windows system.
3. Execute the batch file (drv_install drv_install.bat) from the
command line. In this case, make the driver directory to the
current directory on the command prompt.
Now the installation of the USB driver is completed.
Driver Confirmation
To confirm whether USB driver is correctly installed by the above
procedures, check the driver file " windrvr6.sys " in the detailed
dialog of [USB]-[ FUJITSU USB Driver for ICE] of Device manager.
How to Install/Update USB Driver
Confirm whether the driver versions are 9.01 in the following two
categories of Property dialog of the device manager.
[Jungo]-[WinDriver]
[USB]-[FUJITSU USB Driver for ICE]
3
Fujitsu Microelectronics America, Inc.