Connection Of Ac Adapter - Fujitsu MB2147-01 Application Note

CHAPTER 2 CONNECTION METHOD
2.7

Connection of AC Adapter

Connect the AC adapter to the emulator as shown in Figure 2.7-1 "Connection of AC
Adapter".
First, connect the AC cord to the AC adapter. Then, connect the AC adapter to the
emulator. Finally, insert the AC plug into an AC outlet.
I Connection of AC Adapter
CAUTION
Prohibition
32
Make sure that power to the product is turned off and the power plug is
disconnected from outlets before connecting or disconnecting cables.
Doing so may result in device problems or electric shock.
Grasp connectors when connecting or disconnecting a cable. Do not
grasp the cable. Doing so may result in device problems or electric
shock.
Figure 2.7-1 Connection of AC Adapter
AC cord