Connection Of Test Equipment - Fujitsu MB2147-01 Application Note

2.8

Connection of Test Equipment

To use the external trigger input function and the program execution output function
of the emulator, connect test equipment to the emulator as shown in Figure 2.8-1
"Connection of Test Equipment".
If neither of the functions is to be used, leave the terminals unconnected.
I Connection of Test Equipment
CAUTION
Prohibition
BNC cables
Make sure that power to the product is turned off and the power plug is
disconnected from outlets before connecting or disconnecting cables.
Doing so may result in device problems or electric shock.
Grasp connectors when connecting or disconnecting a cable. Do not
grasp the cable. Doing so may result in device problems or electric
shock.
Figure 2.8-1 Connection of Test Equipment
2.8 Connection of Test Equipment
33