Appendix B User System Specifications - Fujitsu MB2147-01 Application Note

APPENDIX B User System Specifications

APPENDIX B User System Specifications
This section covers the recommended models, circuit configuration, design
precautions, and wiring specifications for an emulator interface connector
implemented on the user system.
For the flat cable environment, Fujitsu recommends selecting a combination of
connectors along with appropriate housing.
I Model Numbers of Recommended Connectors
Table B-1 Model Numbers of Recommended Connectors
Attached cable
FPC cable FH10A-30S-1SH (manufactured by Hirose Electric
Co., Ltd.)
Flat cable FAP-2001-120*(*1)-0BS (manufactured by Yamaichi
Electronics Co., Ltd.)
FAP-20-08#*(*2) (manufactured by Yamaichi
Electronics Co., Ltd.)
FAP-20-04#*(*1) (manufactured by Yamaichi
Electronics Co., Ltd.)
*1:The asterisk (*) represents each of the following terminal forms:
- 1: Right angle/wrapping
- 2: Right angle/solder dip
- 3: Straight/wrapping
- 4: Straight/solder dip
*2:The asterisk (*) represents each of the following terminal forms:
- 1: Right angle/wrapping
- 2: Right angle/solder dip
- 4: Straight/solder dip
See the data sheet of the respective manufacturer according to information such as connector type and
dimensions.
50
Model number Remarks
Includes a latch
Includes housing and a short
latch
Includes housing but no latch
No housing included (beware of
insertion mistakes)