Furuno FAR-2117 Installation Manual page 62

4. INSTALLING OPTIONAL EQUIPMENT
2. Fasten the GYRO CONVERTER board in the processor unit with five washer head
screws and male connector 231-607/019-FUR (called J602) with two screws.
Screw
M3x8 5 pcs
Attaching GYRO CONVERTER board in the processor unit
3. Connect the GYRO CONVERTER board and the 03P9342 board with connector
assemblies 03-2088 and 03-2091.
4-2
GYRO CONVERTER board
64P1106A
Screw
M2.6x10 2 pcs
Connector (231)
231-107/026-FUR
Connector (231)
231-607/019-FUR