Performance Monitor Pm-31 - Furuno FAR-2117 Installation Manual

Marine radar/arpa
Hide thumbs Also See for FAR-2117:
Table of Contents

Advertisement

4.4 Performance Monitor PM-31

This kit is installed in the antenna unit of the FAR-2107/2807 series X-band radar to monitor
radar performance.
Name:
Performance monitor
Type:
PM-31
Code no.:
008-080-438
Name
SCANNER COVER ASSY.
GREASE
SM-XH CONNECTOR
ASSY.
LIFTING FIXTURE
GASKET
Procedure
To hoist the scanner cover assy. to the radar mast, by using rope, attach the lifting fixture
the scanner cover assy. .
1. Remove the bolt and chain at the bottom of the stern-side cover, and then remove the
cover.
2. Coat the bolt hole on the scanner cover assy.
and secure the chain with the bolt.
3. Remove the cover at the bow side also.
4. Insert the XH connector of the SM-XH connector
and the SM connector of the SM-XH connector assy. to the relay plate.
5. Coat the gasket
assy. .
6. Connect the cable assembly coming from the scanner cover assy.
attached at step 4 above.
7. Attach the scanner cover assy. to the stern side of the antenna unit.
8. Reattach the bow-side cover.
Type
PM-31
GASKET GREASE #2
50G
03-2108 6P-6P)
03-001-3264
03-001-3263
with the gasket grease #2 50G
4. INSTALLING OPTIONAL EQUIPMENT
Code number
008-539-430
000-149-704
008-534-840
300-132-640
300-132-631
with silicone sealant (Adhesive 1211)
assy. to J911 on TB board 03P9349
and attach it to the scanner cover
Qty
1
1
1
1
1
to
to the SM connector
4-15

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Far-2117-bbFar-2127Far-2127-bbFar-2817Far-2827

Table of Contents