System Configuration - Furuno FAR-2117 Installation Manual

SYSTEM CONFIGURATION

ANTENNA UNIT
FAR-2117/2817: XN12AF-RSB-096-078
FAR-2127/2827: XN12AF-RSB-096-079
1)
EPFS
IEC-61162 Serial Data
(Navigator)
2)
SDME
IEC-61162 Serial Data
(Speed Log)
3)
Gyrocompass
AD-100
AIS
Track Control Unit
MEMORY CARD
INTERFACE UNIT
CU- 200-FAR
: Standard
: Option
: Dockyard supply
Category of Units
Antenna Unit: Exposed to weather
All other units: Protected from weather
1) Connect the EPFS which is approved in accordance with the requirements of the IMO in
resolution MSC.112(73) is used.
2) Connect the SDME which is approved in accordance with the requirements of IMO in
resolution MSC.96(72) is used.
3) Use the gyrocompass having an update rate that is adequate for the ship's rate of turn.
*: For FAR-2117-BB/2127-BB a monitor unit is prepared by user. See page 1-6.
These monitors have been approved by the IMO, MU-201CR for CAT 2, MU-231CR for
CAT 1. If a different monitor is to be used, its effective diameter must meet the applicable
Category requirements: CAT 1: effective diameter 320 mm or higher, CAT 2: effective
diameter 250 mm or higher. Refer to their operator's manuals for details.
**: Junction boxes are required for more than 100 m antenna cable.
***: Contact output for Alarm
(Load current) 120 mA (Polarity) No.1, 2: Normally Close, No.3, 4: Normally Open
Serial I/O for alarm is also possible, which complies with IEC 61162-1.
XN12AF-RSB-097-078
XN20AF-RSB-096-078
XN20AF-RSB-097-078
XN24AF-RSB-096-078
XN24AF-RSB-097-078
XN12AF-RSB-097-079
XN20AF-RSB-096-079
XN20AF-RSB-097-079
XN24AF-RSB-096-079
XN24AF-RSB-097-079
PROCESSOR UNIT
(Input/Output) RPU-013
(Input)
Gyro Converter
GC-10
Performance Monitor
MONITOR UNIT
JB **
MU-201CR (CAT1)
(FAR-2117/2127)
or
MU-231CR (CAT2)
(FAR-2817/2827)
CONTROL UNIT
RCU-014
(Standard)
or
RCU-015
JB **
(Trackball)
Control Unit
RCU-016
(Remote)
Sub Display
Alarm***
VDR
Switching HUB
HUB-100
External Monitor
AC spec
DC spec
Rectifier
RU-3424
Transformer Unit
RU-1746B-2
RU-1803
vi
*
24 VDC
RU-3423
100/110/115
220/230 VAC
24 VDC
or
100-230 VAC