Furuno FAR-2117 Installation Manual page 16

1. MOUNTING
Desktop mounting
Use the optional accessories to mount the monitor unit on a desktop.
• For FAR-2117/2127: FP03-09820 (Code No.: 008-535-560)
• For FAR-2817/2827: FP03-09830 (Code No.: 008-536-020)
Name
Hanger L 03-163-1111
Hanger R 03-163-1112
03-163-1113
Hanger stay
03-163-2071
Hole plug CP-30-HP-13
Plastic rivet KB-13 Rivet Black
Hex. bolt M6x25
Hex. bolt M10x30
Spring washer M10
Flat washer M10
1. Assemble two hangers and hanger stay with two hex bolts (M10x30), flat washers and
spring washers and cover each hex bolt with hole plug.
2. Fix the above assembly to the mounting location with four hex bolts (M12, dockyard
supply).
3. Fasten the monitor unit to the mounting hanger assembly with four hex bolt (M6x25,
supplied).
4. Cover each hex bolts with panel cover.
5. Cover each holes for hand grip on the hangers with plastic rivets (4 pcs).
1-8
Contents of FP03-09820/09830
Type Code No.
100-305-141
100-305-181
100-305-191
100-305-371
000-160-074-10
000-570-276-10
000-162-949-10
000-162-884-10
000-864-261
000-864-131
Qty Remarks
1
1
For FAR-2117/2127
1
For FAR-2817/2827
2
4
4
2
2
2