Gps Monitor Display - Furuno GP-1610CF Operator's Manual

Display test
1. Press the MENU key to display the main
menu.
2. Press the [0] key to select SYSTEM
MENU. The system menu appears.
3. Press the [1] key to select SELF TEST.
4. Press the [4] key to select DISPLAY
TEST.
DISPLAY TEST
RED
WHT
ENT: Change Mode
Figure 14-3 Display test pattern
GRN BLU BLK
ESC: Esc
WHT
RED
GRN
BLU
BLK
5. Check that colors are properly displayed.
Press the ENT key to change test pattern.
6. To escape, press the ESC key three times.

14.6 GPS Monitor Display

The GPS monitor display provides informa-
tion on all GPS satellites.
1. Press the MENU key.
2. Press the [0] to select SYSTEM MENU.
3. Press the [1] key twice to display the GPS
monitor display.
GPS MONITOR DISPLAY
Fix Mode
2D
DOP
Data Rx : — —
Ref Sta : — —
Program No. 48501030**
Rx Status
No. ELV
23 77
12 16
29 30
27 50
1 21
17 18
26 27
5 52
**: Version no.
Figure 14-4 Sample GPS monitor display
GPS monitor display description
Fix Mode: This shows current position-fix-
ing mode; 2D or 3D (D2D or D3D appears in
DPGS mode).
Alt: Shows present altitude of GPS receiver
when position fixing mode is set to 3D.
DOP: This is the index for position-fixing
accuracy. The lower the value the higher the
accuracy. If the index exceeds 20, position fix-
ing may not be possible.
Indicated at 3D mode
Alt ——— m Status of
DGPS Rx
1
data
Status of
DGPS REF
station
AZM SNR
GPS
278 40
Program no.
042 70
100 40
050 60
303 30
220 50
095 35
142 60
ESC: Esc
14-5