Clearing The Memory - Furuno GP-1610CF Operator's Manual

5. Press the ENT key. The card is formatted
and data are saved. When saving is com-
pleted, the cursor moves to NO at the
SAVE MEMORY line.
6. Press the MENU key.
Note: "Memory card err" appears in the fol-
lowing cases:
• No card is set
• Card is write protected
• Card error
Loading data
Data stored on a memory card can be loaded
as follows:
1. Press the MENU key.
2. Press the [7] key.
3. Press to select LOAD MEMORY.
4. Press s to select YES. The message win-
dow appears.
Overwrite
memory.
ENT: YES
ESC: NO
5. Press the ENT key. After the plotter data
is loaded, the system is reset and the ini-
tial display appears.

14.9 Clearing the Memory

The memory, which stores marks, tracks and
settings, can be cleared to start afresh. When
this done all default settings are restored.
1. Press the MENU key.
2. Press the [8] key. The following prompt
appears.
CLEAR MEMORY
ENT: YES
ESC: NO
3. Press the ENT key.
14-7