Status Monitor - Furuno FELCOM 250 Operator's Manual

5. WEB SOFTWARE
5.3

Status Monitor

The Status monitor displays satellite tracking status, communication status, ship po-
sition information, Communication Unit internal temperature, and error information.
Data is refreshed every five seconds. If the Status monitor is not displayed, do the fol-
lowing to view:
1. Click [Main] in the menu bar.
2. Click [Status monitor] in the sub menu. The [Status monitor] appears as shown:
Refer to the following table description of Status Monitor items:
Tracking status: Satellite tracking information
Satellite
Channel
Status
Antenna elevation
Signal strength
Communication status: Communication information
Voice & Fax
5-4
Item
Name of Satellite that is being tracked.
Displays the searching or tracking channel (Primary/
Alternate).
• Primary: First global channel frequency
• Alternate: Second global channel frequency
Displays satellite tracking status. Searching (search-
ing for satellite), Tuning (antenna fine tuning), Track-
ing (tracking satellite), Blocking (satellite signal is
blocked)
Displays antenna elevation angle.
Displays signal reception level in the modem.
Display voice communication status.
--- (unavailable), Ready (Line is ready), Voice
(Phone in use), Fax (Fax in use), UDI (ISDN UDI in
use), RDI (ISDN RDI in use) (Note: UDI, RDI for FEL-
COM 500 only)
*: FELCOM 500 ONLY
Description
*