Flush Mounting A Series Side By Side - Furuno MU-150HD Operator's Manual

1. MOUNTING, WIRING
1.6

Flush Mounting a Series Side by Side

You can flush mount two display units side by side.
1. Make a cutout in the mounting location as shown below.
2. Follow steps 2 to 5 in section 1.2 to set the two display units in the mounting location.
3. Attach the flush mount fixtures with the washer head screws to join the two display units.
Join the display units with the flush mount fixtures.
4. Fasten the two display units tightly. See steps 7 to 9 in section 1.2.
736±1 (28.98")
4-ø18 (0.71")
9 (0.35")
13
Flush Mount Fixture
(4 pcs.)