Furuno MU-150HD Operator's Manual page 25

2. ADJUSTMENTS
5. Press the or
6. Press the MENU key to close the menu.
Menu item
H_SIZE Adjusts the image size horizontally.
Horizontal size:
V_SIZE Adjusts the image size vertically.
Vertical size:
PHASE** Adjusts the sample timing so that the flicker disappears and
the text is clear.
CONTRAST Increases or decreases the contrast level.
H_POSITION Moves the image position horizontally.
V_POSITION Moves the image position vertically.
R_LEVEL Adjusts the red color level.
G_LEVEL Adjusts the green color level.
B_LEVEL Adjusts the blue color level.
TEMPERATURE Adjusts the color temperature.
5500K (the most reddish), 8000K (the most bluish)
B STRETCH Emphasizes the black color.
[OFF] (standard),
W STRETCH Emphasizes the white color.
[OFF] (standard),
DISP MODE* Selects the displaying method.
[FULL]: Shows the input signal on entire screen.
[NORMAL]: Shows the input signal with original aspect ratio.
SHARPNESS** Sharpens the edge horizontally.
and lines)
*: When inputting SXGA, a circle may be displayed as an ellipse because the aspect ratio differs.
In this case, select [NORMAL] from the [DISP MODE] menu item on the [RGB], [DVI1], or [DVI2]
menus. The right and left on the screen are left blank, but this is normal.
**: If the characters are not clear, adjust [PHASE] and [SHARPNESS].
key to adjust the setting.
RGB/DVI menu descriptions
(narrow),
(narrow),
(darken), (brighten)
(leftward), (rightward)
(upward), (downward)
(weaken), (strengthen)
(weaken), (strengthen)
(weaken), (strengthen)
(weaken),
(weaken),
(soften characters and lines),
Function
(wide)
(wide)
(strengthen)
(strengthen)
(sharpens characters
17
Setting
Depending on in-
put signal
1 to 32
1 to 64
1 to 99 (RGB),
1 to 50 (DVI1,
DVI2)
1 to 40
1 to 64
1 to 64
1 to 64
5500K, 6500K,
7000K, 8000K
OFF, 1 to 10
OFF, 1 to 10
FULL, NORMAL
1 to 10